FLO-ROK® 5 MAX Cartridges

UCAN FLO-ROK® FR5 MAX is a styrene free epoxy acrylate adhesive suitable for year-round use without preconditioning in temperature ranging from -10°C to over 30°C. This versatile two component, high strength anchoring adhesive, provides stress free fastening and is an excellent choice for anchoring & dowelling. A matching static mixing nozzle, as well as FLO-ROK’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener. FR5-MAX is available in 2 sizes 10 oz. for small jobs, and 28 oz. that is perfect for high volume applications such as rebar dowelling. UCAN FLO-ROK® FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ’c , of 2,500 psi to 8,500 psi (17.2 MPa to 58.6 MPa). The FLO-ROK® FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.

Click here to access UCAN’s Flo-Rok Volume Calculator

FEATURES

• IAPMO – ER0490
• ACI 318 Category 1 anchor (continous spec. inspection) for cracked & uncracked concrete
• Tested in accordance to AC 308 for long term sustained load at standard and elevated temperature.
• Seismic resistance
• User friendly, low odour, styrene free & MMA free
• Meets LEED guidelines; low VOC
• Moisture insensitive, non sag formula
• Suitable for damp and water filled holes
• Shelf life 18 months, store cartridge at +5°C to +25°C before use
• Meet CSA A23.3-14, Annex D requirements

TYPICAL APPLICATIONS

• Rebar dowelling
• Highway and bridge construction
• Machine, crane and hoist installation
• Hollow wall anchoring applications
• Renovations

LIMITATION

• FLO-ROK® is not recommended for overhead applications
• Store cartridge at +5C° to +25C° before use