FLO-ROK® FR5 MAX - Injection Anchoring Adhesive

Software for fast and accurate design of anchoring is now available

Click here to download.

UCAN FLO-ROK® FR5 MAX is a styrene free epoxy acrylate adhesive suitable for year-round use without preconditioning in temperature ranging from -10°C to over 30°C. This versatile two component, high strength anchoring adhesive, provides stress free fastening and is an excellent choice for anchoring & dowelling. A matching static mixing nozzle, as well as FLO-ROK’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener. FR5-MAX is available in 2 sizes 10 oz. for small jobs, and 28 oz. that is perfect for high volume applications such as rebar dowelling. UCAN FLO-ROK® FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ’c , of 2,500 psi to 8,500 psi (17.2 MPa to 58.6 MPa). The FLO-ROK® FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.

FEATURES

IAPMO - ER0490
ACI 318 Category 1 anchor (continous spec. inspection) for cracked & uncracked concrete
Tested in accordance to AC 308 for long term sustained load at standard and elevated temperature.
Seismic resistance
User friendly, low odour, styrene free & MMA free
Meets LEED guidelines; low VOC
Moisture insensitive, non sag formula
Suitable for damp and water filled holes
Shelf life 1 year, store cartridge at +5°C to +25°C before use
Meet CSA A23.3-14, Annex D requirements