UCAN Fastening Products
  • MENU
  • PRODUCTS

 

Registered and Trademark Products

 
 
ULTRAPLUS® - PREMIUM SDS PLUS HAMMER DRILL BITS
 
ULTRAPLUS
 

ULTRAPLUS® Premium SDS PLUS hammer drill bits, with four cutter carbide tip, provide superior performance in reinforced steel, rock and granite, and extra long life in concrete & masonry compared to our regular sds plus bit. Improved fluting reduces friction and accelerates dust removal. ULTRAPLUS® SDS PLUS bits will cut through rebar up to 10M.

 
 
ULTRAMAX® - PREMIUM SDS MAX HAMMER DRILL BITS
 
ULTRAMAX
 

ULTRAMAX® Premium SDS MAX Drill Bit with four-cutter carbide tip provide superior performance in reinforced steel, rock, masonry and granite, and extra long life in concrete compared to our regular sds plus bit. Improved fluting reduces friction and accelerates dust removal. Will cut through rebar up to 10M.

 
 
UCAN TI-AWL® TILE DRILL BIT / KIT
 
Ti-Awl
 
  • Fast and accurate drilling in ceramic, porcelain, marble and granite tile
  • Ideal for installing fixtures in bathroom tiles
  • Minimizes cracking or spalling of tile when drilling
  • Use in any rotary, non-percussion, hand drill
  • Broad size range: 3/16”- 1-1/2”
  • Available in single tubes or handy kit with drill guide & carrying case
  • Instructional video
 
 
UCAN WOOD MOLE® SHIP AUGER BITS
 
WOOD MOLE
 
  • Self-feeding point allows for fast and accurate drilling
  • Reinforced single cutter and side lip provide for practically effortless, clean drilling in most hard and soft wood even when nails are encountered
  • Unique, hollow center, corkscrew flute design clears debris from the hole quickly and efficiently
  • Wide lands ensure that the bit remains straight while drilling
  • Steel shank, hardened along its full length, resists bending
 
 
FLO-ROK® INJECTION ADHESIVE ANCHORING
 
FLO-ROK
 

UCAN FLO-ROK® FR5 MAX is a styrene free epoxy acrylate adhesive that incorporates the latest technology in adhesive anchoring. The unique properties of the two component, high strength anchoring adhesive provide low stress fastening. FR5 MAX is an excellent choice for anchoring & dowelling and is ideal for use in a wide range of temperatures from -20°C to over 30°C. A matching static mixing nozzle, as well as FLO-ROK ’s low mix ratio sensitivity, ensures thorough, 10:1 mixing of the resin and the hardener. FR5 MAX is available in 2 sizes - 10 oz., and 28 oz. cartridge perfect for high volume applications such as rebar dowelling. UCAN FLO-ROK® FR5 MAX anchoring adhesive is specifically formulated for continuously threaded steel rod and deformed steel reinforcing bar anchoring to resist static, wind or earthquake (Seismic Design Categories A through F) tension and shear loads in cracked and un-cracked, normal-weight concrete having a specified compressive strength, f ’c, of 2,500 psi to 8,500 psi (17.2 MPa to 58.6 MPa). The FLO-ROK® FR5 MAX adhesive anchors are designed to be used for floor (vertically down), wall (horizontal) anchoring applications.

UCAN FLO-ROK® 6 SD is a high performance 1:1 pure epoxy chemical adhesive anchor specifically formulated for fastening threaded rod and rebar in cracked and uncracked concrete. It is also ideal for anchoring in solid rock and hard natural stone. FLO-ROK® 6 SD is suitable for dry, wet or flooded applications and is styrene free and VOC free.

 
 
CRACKFAST® CONCRETE CRACK REPAIR KIT
 
CRACKFAST
 
  • No messy putty
  • Easy step by step instructions
  • For vertical and horizontal repairs
  • Convenient port holders on side of box
  • Cartridges fit standard caulking guns (UCAN PA100 recommended)
 
 
UCAN TORPEDO® BOLT
 
TORPEDO
 

UCAN TORPEDO® BOLT is an excellent anchoring solution for medium duty and temporary applications. It is mechanically galvanized for corrosion resistance and a wide range of applications. Matched with a standard UCAN ANSI tolerance drill bit, this fastener exhibits consistently high load values. UCAN TORPEDO® BOLT installs quickly leaving the clean appearance of a finished hex washer head on the working surface.

 
 
UCAN TWISTER® ANCHOR
 
TWISTER
 

Special drywall anchor which installs in drywall or plaster using a hand or cordless screwdriver. It requires no pre-drilling and cuts cleanly through all layers of drywall with no tearing and minimal disturbance to its integrity.

 
 
SUPER SCRU-IT® MASONRY ANCHOR SYSTEM
 
SUPER SCRU-IT
 
 
  • Exclusive scalloped threads cut deeper grooves in concrete
  • Much higher holding power than other thread designs
  • Completely stress free - may be installed close to edges
  • Works where others fail in difficult substrates (e.g. horizontal mortar joints)
  • Available with either straight shank or SDS drill systems
  • RUSPRO® coated for maximum corrosion resistance in exposed environments
 
U-DRIVE® ANCHORS
 
U-DRIVE
 

Hot dip galvanized, heat treated spiral shank nail-in fastener for concrete & most masonry.

 
 
U-DRILLS® SCREWS
 
U-DRILLS
 

UCAN U-DRILLS® self drilling screws are engineered for consistent quality and speed. They are cold formed with rolled thread for superior strength and fast drilling performance in metal base materials up to 0.50 inch thick. U-DRILLS® screws are available in a wide variety of types and sizes to suit most applications. UCAN also offers timely delivery on special sizes made to order. U-DRILLS® screws meet SAE J78-1998 standard requirements.

 
 
RUSPRO® CORROSION RESISTANT COATING
 
U-DRILLS
 

The RUSPRO® multi layer coating was developed to provide outstanding resistance against road salt, humidity, solvents and other corrosive elements. This protective coating consists of successive layers of zinc and phosphate as well a baked-on top coat of ceramic silicon resin. In addition to the superior corrosion protection, the RUSPRO® coating has excellent resistance to abrasion and galvanic corrosion.